Leakage at seams keeps airflow steady and prevents over-inflation. The blower must stay on while the bubble house is in use. If it feels too full, unzip slightly to reduce pressure. This isn’t airtight. 10FT Clear Bubble House Inflatable Dome Made from clear PVC or TPU panels attached to white PVC air columns, this spherical dome connects to a tunnel entry. The shell is see-through, framed by white inflatable rings. Continuous powered airflow holds its shape. Panels measure 0.4mm thick PVC or TPU on upgraded models; columns and tunnel are 0.6mm white PVC. Dimensions Diameter: 10 FT (3 meters) Height: around 8 to 8.5 FT Tunnel length: 4.5 to 6.56 FT Tunnel door height: about 5 FT Shipping weight: 62–95 lbs (two adults recommended for carrying) Materials Clear dome panels: 0.4mm PVC or odorless 0.4mm TPU (better for cold) White structural air columns and tunnel: 0.6mm PVC tarpaulin Seams: double to quadruple stitched Zippers: YKK metal (on entry and air vents) Temperature rating: -76°F to 140°F (-60°C to 60°C) Properties: waterproof, tear-resistant, anti-static, wear-resistant, UV-protected Electrical Specs Blower: 680W–750W (model-dependent), UL/ETL certified options Air pump: 500W–600W (model-dependent) Noise: ~68 dB Four air balance outlets around base—keep exhaust covers open to avoid pressure build-up Inflation: ready in 5 minutes, optimal shape by 15 minutes Structure Details Five inflatable support pillars Multiple metal D-rings at base for anchoring with stakes or sandbags Plastic hooks outside for decorations, and inside near ceiling Quick-release zippered vents at base sides for fast deflation Inflation valves with closable caps to seal after blowing up Capacity Fits 4 to 6 people comfortably Max load up to 450 lbs on TPU commercial versions Package Includes Inflatable bubble dome Air blower (680W–750W) Electric air pump (500W–600W) 8 ground stakes & plastic hammer 1–2 repair kits Storage bag 50–100 balloons (varies by model) Setup Surface Grass, turf, concrete, asphalt, pavers, sports courts Surface must be flat and level Leave about 2 meters clear around perimeter Weather & Safety No use if wind exceeds 12 mph Keep out of rain, snow, ice Avoid direct sun to prevent heat build-up inside dome Always anchor securely with stakes or sandbags outdoors Stay clear of open flames and heat sources Care Notes PVC wrinkles after packing—normal, not damage. Sunlight before inflation softens wrinkles. Zip the bottom entry closed before inflating. No shoes, keys, or sharp items inside to avoid punctures; repair kit included for quick fixes. On windy days, anchor points must release under extreme loads; don’t tie to fixed concrete bolts. Storage After use, turn off blower, open vents for deflation. Fold then roll dome from the far end to push air out. Clean with damp cloth, dry fully before packing. Store in bag, in a cool, dry, ventilated place away from sunlight.
